BATTERY X-RAY GENERATOR
The most innovative technology for the High Frequency X-ray Generator, which permits high constant output power from any standard power socket or without it (Stand Alone). Thanks to the batteries charger, the generator can be operated for a long period of time in any Clinic or Hospital area, Operating Rooms, Intensive Care, Emergency, etc.
FEATURES
-
···· The Most Advanced Technology: (OC) Overpressure Cut, (DC) Dynamic Flow Control, (DSM) Dual Measurement System, (N) Pressure and Temperature Normalization.
-
···· Hyperbaric and Normobaric ozone therapy treatments.
-
···· Touch screen Control Software to protocolize your treatment.
-
···· 12 Operating modes: Syringe (automatic/manual), Bagging (Close/open), Insufflation (vaginal/rectal), Saline Solutions Hemotherapy, Major Autohemotherapy (MAHT) (Normobaric / Hyperbaric), Liquid Ozonation (serum/water/oil), Vacuum.
-
···· User Friendly interface. Intuitive and configurable.
- (*) OPTIONAL FEATURE
- High frequency constant potential.
- Self-diagnosis indicators.
- Tube protection circuitry prolongs Tube life and increases system performance.
- Equipped with closed loop control of X-ray Tube current, kVp and filaments.
- Automatic line compensation due to closed loop operation of X-ray Tube current and kVp.
- Independent Heat Unit storage for each X-ray Tube, even after turning On / Off the equipment.
- Independent memory for storing Radiographic operating parameters
CLINICAL USE
Under normal operating conditions, the Batteries Charger keeps the batteries fully charged with an equalized level as long as the unit is connected to the mains (charging) but with the incorporation of Stand-Alone, we have an autonomous operation of the unit when the power line is not present.
On this mode it can be selected from the control station some positioning preconfigured (up to 16 positions in the ceiling suspension) with two options:
- Auto- Positioning – TABLE: The suspension automatically positions itself above the table according to the SID specified during the Configuration
- Auto- Positioning – WALL-STAND:The suspension automatically positions itself in front of the vertical Bucky or receptor according to the SID specified during Configuration.
TECHNICAL SPECS
Table/Bucky
| Table top dimensions | Height from floor | Table top composition | Table top-to-film distance | Table top Al. equivalence |
|---|---|---|---|---|
|
— |
— |
— |
— |
— |
| Table top weight limit | Table top movement | Longitudinal travel | Transverse table top travel | Table lock controls |
|---|---|---|---|---|
|
— |
— |
— |
— |
— |
| Table bucky | Bucky travel | Total center-to-center Radiographic coverage | Grid | Cassette sizes |
|---|---|---|---|---|
|
— |
— |
— |
— |
— |
Wall bucky
| Standard type | Bucky | Vertical bucky travel | Table-top-film distance | Vertical movement | Minimum distance |
|---|---|---|---|---|---|
|
— |
— |
— |
— |
— |
| Cassette sizes | Grid | Bucky front Al. equivalence | Locks Left or Right load | Weight |
|---|---|---|---|---|
|
— |
— |
— |
— |
— |
DOCUMENTATION
RELATED PRODUCTS
